For Sale

RV-7 by friend of a friend in Nashville, TN area.  Has IO-360 XP Superior, 2 Garmin GX3’s, Garmin SL30, Garmin Glide Slope, Garmin Transponder, Grand Rapids Engine Monitor, and backup steam gauges.  Builder/Owner is Jim Coffman 931-7978125, jameswesleycoffman@gmail.com.  If you’re interested, I have 5 photos I can send you.  Keith Pache 713-412-7010, pilotpache@aol.com

 

Pitts S1 project. Includes nicely welded fuselage, gear, interplane struts, horizontal stabs, elevators, engine mount, and set of stainless drag/anti-drag wires for S1-C. Needs some welding on fuselage, [ tabs, seat, control torque assembly]. This is a very cheap way to start a Pitts project. $800  936-443-9163.    Don Brewer

 

1997 Christen Eagle II Day/VFR Aerobatic Bi-plane *  Price Reduced to $69,000 *  310hrs TT airframe *  116hrs TT Lycoming YIO-390-EXP *  Hartzell CSP  *  new Garmin GTR 200 Comm and GTX 345 ADS-B Transponder *  PS Engineering PMA 1200 Intercom  *  hangered at Conroe North Houston Aprt *  Contact Brewster Shaw at 713-202-6025 or poppy@theshawhome.com.

 

CESSNA 180, 1955 B, O470K.  3540 TT, 157 Factory Reman, 157 on MT. Prop, Garmin GTN 650, ADSB IN/OUT, Garmin GTX 345 Trans, Garmin G-5, JPI 730 Eng Analyzer, King HSI, S Tec autopilot, Collins Nav Com (#2 radio), Monarch Fuel Tanks, 86 useable gallons, Engine Pre Oiler, Extended luggage Compartment, Horton Stol Kit, Snider Speed Kit, All Log Books, Annual Oct. $155,000.  I don’t need two airplanes, I enjoy my cub flying. I don’t need the 180.  Based at Livingston Airpark (00R) READY TO FLY.  Call Tom Davenport, 713-504-5536

Hatz CB-1/Classic project.  Purchased a flying Hatz, so my project is for sale.  Fuselage/tail are welded and on the landing gear. It includes many of the Classic features such as the reclined rear seat. Wing ribs are complete, center section is started, spars are included but not yet drilled. Most metal fittings and compression tubes are complete for the wings. Two sets of plans, one CB-1 and one Classic (New). New Matco tailwheel, plus a few boxes of misc. parts and pieces. Great project for less than the cost of materials.  No flying or drag wires included. $5,000.  Contact Kevin Fruehbird, fruehbird@yahoo.com or 832-797-5770

 

Micro Mong ultralight bi-plane kit.  Tubular construction of fuselage, rudder, horizontal & elevators are complete.  Sheet stock, fabric, tires included.  Built by longtime EAA member, recently deceased.  Price very negotiable, make offer.  His wife would just like to know the project was completed.  Located in Panorama Village.  Phyllis Masterson (713) 859-5291

2004 Diamond DA-40, G1000, WAAS, Syn Vision & Terrain, XM link, TAWS B, Kap-140 AP, TTach 1,068 hrs SN, TTHobbs 1,226, Cruise@140kts on 9 gph, $42,000 for ¼ share, plus monthly fixed cost sharing & engine reserve, hangered at CXO, Gary @ 832-922-0231 or h034851@yahoo.com

 

New Slick magnetos removed from brand new Lycoming engine, 1 Slick 4370 magneto and 1 Slick 4372 magneto with Impulse Coupler, Slick Harnesses.  Retail over $3400.  No core required.  Used on many  -390/-360/-320 engines.  $2200 to EAA 302 member.  Brent Crabe 936-494-9494

For Rent--Nov 1st, half of my hangar The rent is $250 per month.  It is a large rectangular hangar, B-9 on the first alley on the hill to the right as you come thru the gate, next to Don Guice.   Ron Cooke 936-890-1296 or cell 936-499-241

 

For Rent--Box hangar for rent.  Can be available February 1st.  Located up on hill, taxiway EE. Approximately 42’ X 34”.  Call/text Terry, 832-693-694  

Hints for Homebilders videos at eaa.org